The influence of repair welding on the mechanical properties and residual stresses has been studied. Special problems are associated with the start and end of repair welds. Repair welds are usually short and they are deposited on an existing weld. The mechanical properties can be changed. The interaction between the weak material and the harmful tensile residual stresses increases the risk of brittle fracture. Residual stresses were measured before and after repair welding and compared with each other. The distribution of residual stresses after repair welding is more inconvenient than before the repair welding. This is the reason why special attention has to be paid to this distribution.

Rights

URN

URN:NBN:SI:DOC-N76A02PI

COBISSID

6213910

Added

16.09.2009

Metadata

Citation

APA:

Vuherer, Tomaž, Rojko, Danilo, Gliha, Vladimir (2001). Vpliv reparaturnih zvarov na lastnosti zvarnega spoja. Materiali in tehnologije, volume 35, issue 1/2, str. 61-64. URN:NBN:SI:DOC-N76A02PI from http://www.dlib.si

MLA:

Vuherer, Tomaž, Rojko, Danilo, Gliha, Vladimir. "Vpliv reparaturnih zvarov na lastnosti zvarnega spoja." Materiali in tehnologije volume 35. issue 1/2 (2001) str. 61-64.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-N76A02PI>

Materiali in tehnologije
2000-
(Assembly record)

Vpliv reparaturnih zvarov na lastnosti zvarnega spojaInfluence of repair welds on the weld-joint properties

Vpliv reparaturnih zvarov na lastnosti zvarnega spoja
Influence of repair welds on the weld-joint properties