In the present study paraffin oil (10% of mass) was used as an additive in the spinning of polypropylene filament yarns on a laboratory spin-draw device. The oil was added to the polymer in the feeding zone of the extruder prior melting of the polymer. The PP filament yarns and the filament yarns to which the oil was added were spun at three different temperatures. The objective of the study was to investigate the influence of the addition of paraffin oil on the spinning process and on the properties of produced filament yarns.

Rights

URN

URN:NBN:SI:DOC-BY589JMY

COBISSID

93610

Added

13.05.2010

Metadata

Citation

APA:

Demšar, Andrej, Sluga, Franci (1998). PP fibers spun with the addition of paraffin oil. Kovine zlitine tehnologije, volume 32, issue 6, str. 523-525. URN:NBN:SI:DOC-BY589JMY from http://www.dlib.si

MLA:

Demšar, Andrej, Sluga, Franci. "PP fibers spun with the addition of paraffin oil." Kovine zlitine tehnologije volume 32. issue 6 (1998) str. 523-525.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-BY589JMY>

Kovine zlitine tehnologije
1992-1999
(Assembly record)

PP fibers spun with the addition of paraffin oilPP vlakna izdelana z dodatkom parafinskega olja

PP fibers spun with the addition of paraffin oil
PP vlakna izdelana z dodatkom parafinskega olja