State of the art 3D-digitization systems designed for reverse engineering (RE)modelling are characterized by increased scanning speed and also by the possibility to generate a large number of points in a short time. Generally, this improves the efficiency of the RE-modelling process. In practice however,a significant number of points in the stage of the CAD model generation may become an issue. In addition, the 3D-digitization process is often connected with measuring errors because of the properties of measuring systems and/or the object. Therefore, nowadays considerable attention is devoted to the problem of pre-processing the results of 3D-digitization, often by means of tools of artificial intelligence. This paper introduces a pre-processing system based on fuzzy logic, along with the results of its practical application.

Rights

URN

URN:NBN:SI:DOC-1TUABHHX

COBISSID

11265563

Added

14.07.2011

Metadata

Citation

APA:

Budak, Igor, Soković, Mirko, Kopač, Janez, Hodolič, Janko (2009). Point data pre-processing based on fuzzy logic for reverse engineering modelling. Strojniški vestnik, volume 55, issue 12, str. 755-765. URN:NBN:SI:DOC-1TUABHHX from http://www.dlib.si

MLA:

Budak, Igor, Soković, Mirko, Kopač, Janez, Hodolič, Janko. "Point data pre-processing based on fuzzy logic for reverse engineering modelling." Strojniški vestnik volume 55. issue 12 (2009) str. 755-765.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-1TUABHHX>

Strojniški vestnik
1955-
(Assembly record)