In this paper, four different cavitation models were compared for predicting cavitation around a hydrofoil. A blocked structured mesh was created in ICEM CFD. Steady-state 2D simulations were performed in Ansys CFX. For all cases, the SST turbulence model with Reboud's correction was used. For Zwart and Schnerr cavitation models, the recommended values were used for the empirical coefficients. For the full cavitation model and Kunz cavitation model, values for the empirical coefficients were determined as the recommended values did not provide satisfactory results. For the full cavitation model, the effect of non-condensable gases was neglected. For all the above-mentioned cavitation models, the pressure coefficient distribution was compared to experimental results from the literature.

Rights

URN

URN:NBN:SI:DOC-OW6JS8BJ

COBISSID

66355203

Added

16.07.2021

Metadata

Citation

APA:

Pezdevšek, Marko, Biluš, Ignacijo, Hren, Gorazd (2021). Comparison of cavitation models for the prediction of cavitation around a hydrofoil. JET on-line
Journal of energy technology
, volume 14, iss. 1, str. 41-55. URN:NBN:SI:DOC-OW6JS8BJ from http://www.dlib.si

MLA:

Pezdevšek, Marko, Biluš, Ignacijo, Hren, Gorazd. "Comparison of cavitation models for the prediction of cavitation around a hydrofoil." JET on-line
Journal of energy technology
volume 14. iss. 1 (2021) str. 41-55.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-OW6JS8BJ>

Journal of energy technology
2008-
(Assembly record)

Comparison of cavitation models for the prediction of cavitation around a hydrofoilPrimerjava kavitacijskih modelov za numerično napoved kavitacije na hidrodinamičnem profilu

Comparison of cavitation models for the prediction of cavitation around a hydrofoil
Primerjava kavitacijskih modelov za numerično napoved kavitacije na hidrodinamičnem profilu