With the exception of maschining centers, cutting tools are the most expensive items in the production costs of a tool-making company. Unorganised warehousing and poor monitoring of the condition of the cutting tools are still typical of such companies, and this results in the underhouse of machining centres and high costs for the cutting tools. By using well-organized and computerized tool management of the cutting tools it is possible to reduce costs, but for the efficient planning of production this is still not enough. In this article we introduce the concept of Simulation-Aided Tool Management (SATM) and the main features of the SATM system, which was developed in cooperation with a tool-making company.

Rights

URN

URN:NBN:SI:DOC-HDD0TQ1Q

COBISSID

6048027

Added

16.09.2009

Metadata

Citation

APA:

Debevec, Mihael, Perme, Tomaž, Noe, Dragica (2003). Računalniško upravljanje z obdelovalnimi orodji v orodjarni, podprto s simulacijo. Strojniški vestnik, volume 49, issue 1, str. 16-27. URN:NBN:SI:DOC-HDD0TQ1Q from http://www.dlib.si

MLA:

Debevec, Mihael, Perme, Tomaž, Noe, Dragica. "Računalniško upravljanje z obdelovalnimi orodji v orodjarni, podprto s simulacijo." Strojniški vestnik volume 49. issue 1 (2003) str. 16-27.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-HDD0TQ1Q>

Strojniški vestnik
1955-
(Assembly record)

številka

Strojniški vestnik
2003
(Complete issue)

Računalniško upravljanje z obdelovalnimi orodji v orodjarni, podprto s simulacijoSimulation-aided management of cutting tools in a tool-making company

Računalniško upravljanje z obdelovalnimi orodji v orodjarni, podprto s simulacijo
Simulation-aided management of cutting tools in a tool-making company