dLib.si - search results

Evaluation of mechanical, microstructures and wear behaviours of aluminium alloy reinforced with ...

Contibutors: Suleiman, Idawu Yakubu (author) / Kasim, Auwal (author) / Mohammed, Abdullahi Tanko (author) / Sirajo, Munir Zubairu (author)

1. PDF document (1786 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Demonstration of interference patterns by the random walk of particles

Contibutors: Grabec, Igor (author) / Sok, Nikolaj (author)

1. PDF document (1003 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (11 kB)

A model for material strengthening under the combined effect of cavitation-bubble collapse and Al...

Contibutors: Liu, Lei (author) / Guo, Huafeng (author) / Yu, Ping (author)

1. PDF document (5078 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Relationship between tire ground characteristics and vibration noise

Contibutors: Zhou, Haichao (author) / Li, Huiyun (author) / Liang, Chen (author) / Zhang, Lingxin (author) / Wang, Guolin (author)

1. PDF document (4181 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Media flow analysis of single-channel pre-mixed liquid CO2 and MQL in sustainable machining

Contibutors: Grguraš, Damir (author) / Sterle, Luka (author) / Malneršič, Aleš (author) / Kastelic, Luka (author) / Courbon, Cedric (author) / Pušavec, Franci (author)

1. PDF document (2208 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (28 kB)

Reliability-based design optimization of pump penetration shell accounting for material and geome...

Contibutors: Velayudhan, Gautham (author) / Venugopal, Prabhu Raja (author) / Gnanasigamony Thankareathenam, Ebron Shaji (author) / Selvakumar, Mohanraj (author) / Pudukarai Ramaswamy, Thyla (author)

1. PDF document (2020 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Residual, corrosion & tribological behavior of HVOF sprayed sustainable temperature-dependent car...

Contibutors: Tyagi, Ankit (author) / Murtaza, Qasim (author) / Walia, Ravinderjit Singh (author)

1. PDF document (1681 kB)

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Dynamic modelling, experimental identification and computer simulations of non-stationary vibrati...

Contibutors: Đokić, Radomir (author) / Vladić, Jovan (author) / Kljajin, Milan (author) / Jovanović, Vesna (author) / Marković, Goran (author) / Karakašić, Mirko (author)

1. PDF document (2065 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (56 kB)

Design of a throat-extended FDM extruder for multi-axis 3D printing

Contibutors: Liu, Hao (author) / Liu, Zhoupeng (author) / Hao, Siting (author)

1. PDF document (2543 kB)

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Minimization of the lifecycle cost of a rotary heat exchanger used in building ventilation system...

Contibutors: Sokolnikas, Ignas (author) / Čiuprinskas, Kęstutis (author) / Čiuprinskiene, Jolanta (author)

Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (939 kB)

1. TXT document (37 kB)

Contibutors: Bhatia, Anmol (author) / Wattal, Reeta (author)

1. PDF document (2581 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Virtual minimization of residual stress and deflection error in the five-axis milling of turbine ...

Contibutors: Soori, Mohsen (author) / Asmael, Mohammed (author)

1. PDF document (2079 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

A strain-based method to estimate longitudinal force for intelligent tires by using a physics-bas...

Contibutors: Zhou, Haichao (author) / Li, Huiyun (author) / Yang, Jian (author) / Chen, Qingyun (author) / Wang, Guolin (author) / Han, Tong (author) / Ren, Jieyu (author) / Ma, Te (author)

1. PDF document (1357 kB)

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

Studying the performance of cutting carbon fibre-reinforced plastic using an abrasive water jet t...

Contibutors: Hussien, Ahmed A. (author) / Qasem, Isam (author) / Kataraki, Pramodkumar S. (author) / Al-Kouz, Wael G. (author) / Janvekar, Ayub Ahmed (author)

Ultrasonic scattering attenuation in nodular cast iron

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (980 kB)

1. TXT document (32 kB)

Contibutors: Santos, Mário (author) / Santos, Jaime (author)

1. PDF document (1087 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (49 kB)

HIL evaluation of a novel real-time energy management system for an HEV with a continuously varia...

Contibutors: Taghavipour, Amir (author) / Alipour, Ali (author)

1. PDF document (1629 kB)

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Investigation on the modeling and dynamic characteristics of a novel water hydraulic proportional...

Contibutors: Han, Mingxing (author) / Liu, Yinshui (author) / Liao, Yitao (author) / Wang, Shucai (author)

1. PDF document (4265 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (41 kB)

Ultra-precision single-point diamond turning of a complex sinusoidal mesh surface using machining...

Contibutors: Ning, Peixing (author) / Zhao, Ji (author) / Ji, Shijun (author) / Li, Jingjing (author) / Dai, Handa (author)

1. PDF document (3694 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (23 kB)

Basic theory and design method of variable shaft angle line gear mechanism

Contibutors: Chen, Yang-zhi (author) / He, Chao (author) / Lyu, Yue-ling (author)

1. PDF document (1574 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Predictive estimation of sliding bearing load-carrying capacity and tribological durability

Contibutors: Chernets, Myron (author) / Opielak, Marek (author) / Kornienko, Anatolii (author) / Radko, Oleg (author)

Experimental investigation and mathematical modelling of heat transfer coefficient in double slop...

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (623 kB)

1. TXT document (26 kB)

Contibutors: Patel, Raj Vardhan (author) / Yadav, Anshul (author) / Winczek, Jerzy Adam (author)

1. PDF document (1724 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Mechanical properties of adhesive joints made with pressure-sensitive adhesives

Contibutors: Rudawska, Anna (author) / Wahab, Magd Abdel (author)

Characterization of the AZ31/AW-6060 joint fabricated using compound casting with a Zn interlayer...

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (637 kB)

1. TXT document (40 kB)

Contibutors: Bucki, Tomasz (author) / Konieczny, Marek (author) / Bolibruchová, Dana (author) / Rzepa, Sylwia (author)

1. PDF document (5123 kB)

Numbering: 2021, volume 67, issue 7/8

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Dynamic analysis of line gear pair based on numerical manifold method

Contibutors: Ding, Jiang (author) / Deng, Aiping (author) / Liu, Liwei (author) / Lu, Mengen (author)

1. PDF document (1950 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Optimization of the internal roller burnishing process for energy reduction and surface properties

Contibutors: Nguyen, Trung Thanh (author) / Le, Minh-Thai (author)

1. PDF document (2368 kB)

Numbering: 2021, volume 67, issue 4

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Determining optimum rotary blade design for wind-powered water-pumping systems for local selected...

Contibutors: Mohammed, Abdulbasit (author) / Lemu, Hirpa G. (author) / Sirahbizu, Belete (author)

1. PDF document (1163 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (30 kB)

Experimental investigation of a cryogenically cooled oxygenmist near-dry wire-cut electrical disc...

Contibutors: Sampath, Boopathi (author) / Myilsamy, Sureshkumar (author)

1. PDF document (1238 kB)

Numbering: 2021, volume 67, issue 6

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Multi-parametric dynamic analysis of a rolling bearings system

Contibutors: Kydyrbekuly, Almatbek (author) / Nikonov, Anatolij (author)

1. PDF document (1873 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Nonlinear control of a pneumatic actuator based on a dynamic friction model

Contibutors: Bo Tran, Xuan (author)

1. PDF document (6490 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Control of an anthropomorphic manipulator using LuGre friction model - design and experimental va...

Contibutors: Ali, Khurram (author) / Mehmood, Adeel (author) / Muhammad, Israr (author) / Razzaq, Sohail (author) / Iqbal, Jamshed (author)

1. PDF document (3160 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (40 kB)

Predictions of friction coefficient in hydrodynamic journal bearing using artificial neural networks

Contibutors: Milčić, Dragan (author) / Alsammarraie, Amir (author) / Madić, Miloš (author) / Krstić, Vladislav (author) / Milčić, Miodrag (author)

1. PDF document (1723 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (33 kB)

Trajectory-tracking control for manipulators based on fuzzy equivalence and a terminal sliding mode

Contibutors: Liu, Youyu (author) / Li, Yi (author) / Zhang, Xuyou (author) / Chen, Bo (author)

1. PDF document (4228 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Active vibration control of a mechanical servo high-speed fine-blanking press

Contibutors: Liu, Yanxiong (author) / Shu, Yuwen (author) / Hu, Wentao (author) / Zhao, Xinhao (author) / Xu, Zhicheng (author)

1. PDF document (3724 kB)

Numbering: 2021, volume 67, issue 9

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Effectiveness of automatic cam programming using machining templates for the manufacture of speci...

Contibutors: Kowalski, Maciej (author) / Zawadzki, Przemysław (author) / Hamrol, Adam (author)

1. PDF document (1722 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (54 kB)

Fault diagnosis of rotation vector reducer for industrial robot based on a convolutional neural n...

Contibutors: Yang, Shuai (author) / Luo, Xing (author) / Li, Chuan (author)

1. PDF document (2585 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (42 kB)

Response analysis of a scraper conveyor under chain faults based on MBD-DEM-FEM

Contibutors: Wang, Zisheng (author) / Li, Bo (author) / Liang, Chao (author) / Wang, Xuewen (author) / Li, Jiahao (author)

1. PDF document (6406 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Investigation on the depth of slip hanger teeth bite into casing and the mechanical properties of...

Contibutors: Chen, Yong (author) / Tan, Jinjin (author) / Xiao, Guoping (author)

1. PDF document (2391 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (32 kB)

Optimization of laser parameters and dimple geometry using PCA-coupled gRG

Contibutors: Kandasamy Ganesan, Saravanan (author) / Thanigaivelan, Rajasekaran (author)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (916 kB)

Mechanical characterization and structural attributes of biohybrid composites derived using hemp,...

Contibutors: Bose, Rajmohan (author) / Kandavel, Arunachalam (author)

1. PDF document (4476 kB)

Numbering: 2021, volume 67, issue 10

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (44 kB)

Performance study of EDM process parameters using TiC/ZrSiO sub 4 particulate-reinforced copper c...

Contibutors: Saminatharaja, Duraisivam (author) / Suresh, Periyakgounder (author) / Selvaraj, Mahalingam (author) / Elangandhi, Jamuna (author)

1. PDF document (2781 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

A method for calculating elliptic gear transmission efficiency based on transmission experiment

Contibutors: Dong, Changbin (author) / Liu, Yongping (author) / Zhao, Gang (author)

1. PDF document (3645 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (39 kB)

Electro-hydraulic drive of the variable ratio lifting device under active load

Contibutors: Kosucki, Andrzej (author) / Stawiński, Łukasz (author) / Morawiec, Adrian (author) / Goszczak, Jarosław (author)

1. PDF document (3530 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (45 kB)

Applicability of MCDM algorithms for the selection of phase change materials for thermal energy s...

Contibutors: Felix, Paul Gregory (author) / Rajagopal, Velavan (author) / Kumaresan, Kannan (author)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (814 kB)

Investigation of hydrodynamic flow characteristics in helical coils with ovality and wrinkles

Contibutors: Periasamy, Govindaraj (author) / Mouleeswaran, Senthilkumar (author) / Venugopal, Prabhu Raja (author) / Perumal, Chellapandi (author)

1. PDF document (3676 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Synchronization and stability of a three co-rotating rotor system coupled with springs in a non-r...

Contibutors: Du, Mingjun (author) / Hou, Yongjun (author) / Tang, Tong (author) / Tang, Lian (author) / Wang, Jialong (author) / Gao, Hongbo (author)

1. PDF document (4826 kB)

Numbering: 2021, volume 67, issue 11

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (65 kB)

Study of Bondura® expanding PIN system

Contibutors: Akhtar, Muhammad Maaz (author) / Karlsen, Oyvind (author) / Lemu, Hirpa G. (author)

Modelling and multi-objective optimization of elastic abrasive cutting of C45 and 42Cr4 steels

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (827 kB)

1. TXT document (38 kB)

Contibutors: Stefanova Aleksandrova, Irina (author) / Stoynova, Anna (author) / Aleksandrov, Anatoliy (author)

1. PDF document (1111 kB)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (63 kB)

Investigation of cutting performance of a circular saw blade based on ANSYS/LS-DYNA

Contibutors: Wang, Zhiwen (author) / Zeng, Qingliang (author) / Lu, Zhenguo (author) / Wan, Lirong (author) / Zhang, Xin (author) / Liu, Zhihai (author)

1. PDF document (1596 kB)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (59 kB)

Review of peridynamics

Contibutors: Ladányi, Gábor (author) / Gonda, Viktor (author)

Extremal-micro genetic algorithm model for time-cost optimization with optimal labour productivity

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (505 kB)

1. TXT document (79 kB)

Contibutors: Sivakumar, A. (author) / Bagath Singh, N. (author) / Sathiamurthi, P (author) / Karthi Vinith, K. S. (author)

Numbering: 2021, volume 67, issue 12

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. PDF document (368 kB)

An investigation on laser welding parameters on the strength of TRIP steel

Contibutors: Rahul, Khot S. (author) / Rao, T. Venkateshwara (author) / Harshad, Natu (author) / Girish, H. N. (author) / Ishigaki, Tadashi (author) / Madhusudan, Puttaswamy (author)

1. PDF document (1829 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (35 kB)

Dynamic analysis of hydraulic support with single clearance

Contibutors: Zeng, Qingliang (author) / Li, Yangyang (author) / Zhang, Yang (author)

1. PDF document (2968 kB)

Numbering: 2021, volume 67, issue 1/2

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (47 kB)

Residual stress and deformation analysis in machining split straight bevel gears

Contibutors: Wang, Bin (author) / Yan, Chenxiao (author) / Li, Jubo (author) / Feng, Peiyao (author) / Wang, Shuaipu (author) / Chen, Shuo (author) / Su, Jianxin (author)

1. PDF document (3193 kB)

Numbering: 2021, volume 67, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (36 kB)

Flat specimen shape recognition based on full-field optical measurements and registration using m...

Contibutors: Maček, Andraž (author) / Urevc, Janez (author) / Halilovič, Miroslav (author)

1. PDF document (3120 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

Reduction of stresses and mass of an engine rubber mount subject to mechanical vibrations

Contibutors: Dávalos, Omar (author) / Caldino-Herrera, Uzziel (author) / Cornejo-Monroy, Delfino (author) / Tenango-Pirin, Oscar (author) / García, Juan Carlos (author) / Basurto-Pensado, M. A. (author)

1. PDF document (2651 kB)

Numbering: 2021, volume 67, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (50 kB)

Optimization of running blade prosthetics utilizing crow search algorithm assisted by artificial ...

Contibutors: Rosel Solis, Nanuel Javier (author) / Dávalos Ramírez, José Omar (author) / Molina Salazar, Javier (author) / Ruiz Ochoa, Juan Antonio (author) / Gómez Roa, Antonio (author)

1. PDF document (1836 kB)

Numbering: 2021, volume 67, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (53 kB)

Hot incremental forming of biocomposites developed from linen fibres and a thermoplastic matrix

Contibutors: Torres, Sandino (author) / Ortega, Roberto (author) / Acosta, Pablo (author) / Calderón, Edisson (author)

1. PDF document (1607 kB)

Numbering: 2021, volume 67, issue 3

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (37 kB)

Operating performance of external non-involute spur and helical gears

Contibutors: Okorn, Ivan (author) / Nagode, Marko (author) / Klemenc, Jernej (author)

1. PDF document (1576 kB)

Numbering: 2021, volume 67, issue 5

Provider: Univerza v Ljubljani, Fakulteta za strojništvo
(Obvezni izvod spletne publikacije)

1. TXT document (71 kB)

Optimization of a self-excited pulsed air-water jet nozzle based on the response surface methodology

Contibutors: Wang, Yong (author) / Wang, Xiaolin (author) / Zhang, Zilong (author) / Li, Yu (author) / Liu, Houlin (author) / Zhang, Xiang (author) / Hočevar, Marko (author)