During continuous monitoring of the primary aluminium production in Talum it was found out that the quality of prebaked anodes is non-uniform. As a result, high nett consumption of anodes in the electrolysis B and often horizontal cracking of anodes for electrolysis C have occured. These problems may arise from different sources, one of these are non-uniform conditions in the anode baking furnace. In this investigation we determined the temperature distribution inside one chamber of the anode baking furnace. Results indicate that the temperature distribution is non-uniform. Therefore, we conclude that non-uniform conditions inside the chamber significantly contribute to variable properties of prebaked anodes.

Rights

URN

URN:NBN:SI:DOC-NLM93GBG

COBISSID

166314

Added

16.09.2009

Metadata

Citation

APA:

Zupanič, Franc, Šibila, Avgust (1999). Toplotne razmere v kalcinacijski komori za pečenje anod. Kovine zlitine tehnologije, volume 33, issue 5, str. 371-375. URN:NBN:SI:DOC-NLM93GBG from http://www.dlib.si

MLA:

Zupanič, Franc, Šibila, Avgust. "Toplotne razmere v kalcinacijski komori za pečenje anod." Kovine zlitine tehnologije volume 33. issue 5 (1999) str. 371-375.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-NLM93GBG>

Kovine zlitine tehnologije
1992-1999
(Assembly record)

Toplotne razmere v kalcinacijski komori za pečenje anodTemperature distribution in the anode baking furnace

Toplotne razmere v kalcinacijski komori za pečenje anod
Temperature distribution in the anode baking furnace