Tensile tests were carried out on specimens of the same micro-alloyed structural steel after different thermal treatments, with the aim being to obtain the microstructure in a weldćs heat-affected zone. The mechanical properties were determined at a temperature below the brittle threshold transition Charpy temperature, the fracture surfaces were examined, the cleavage strength was deduced and the space orientation of the cleavage facets was determined. No relation was found between the results of the tensile tests and the previously determined Charpy properties after an identical thermal treatment.

Rights

URN

URN:NBN:SI:DOC-JTB4SFQZ

COBISSID

716458

Added

08.06.2010

Metadata

Citation

APA:

Kosec, Gorazd, Arzenšek, Boris, Vojvodič-Tuma, Jelena, Vodopivec, Franc (2009). The brittle tensile fracture and cleavage strength of a structural steel with a simulated weld-affected-zone microstructure. Materiali in tehnologije, volume 43, issue 1, str. 31-37. URN:NBN:SI:DOC-JTB4SFQZ from http://www.dlib.si

MLA:

Kosec, Gorazd, Arzenšek, Boris, Vojvodič-Tuma, Jelena, Vodopivec, Franc. "The brittle tensile fracture and cleavage strength of a structural steel with a simulated weld-affected-zone microstructure." Materiali in tehnologije volume 43. issue 1 (2009) str. 31-37.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-JTB4SFQZ>

Materiali in tehnologije
2000-
(Assembly record)

The brittle tensile fracture and cleavage strength of a structural steel with a simulated weld-affected-zone microstructureTrdnost pri krhkem prelomu in cepilna trdnost za konstrukcijsko jeklo s simulirano mikrostrukturo toplotne cone zvara

The brittle tensile fracture and cleavage strength of a structural steel with a simulated weld-affected-zone microstructure
Trdnost pri krhkem prelomu in cepilna trdnost za konstrukcijsko jeklo s simulirano mikrostrukturo toplotne cone zvara