From the results of the researches on the pipes, cuted our of the steam boiler of 325 MW TE Šoštanj, it was established that the deformation resistance, after 100 hours staatical load creep at temperature 580°C, was four times lower at the flame side, as at the chimney side. In that research we want to define, if the reason for this distinctive change in deformation abilities is in change of dislocation, submicrostructure, originated at heat treatment of the pipes, or in different conditions of formations molibdenium and vanadium carbides in the steel.

Rights

URN

URN:NBN:SI:DOC-HEVVC5VH

COBISSID

50858

Added

13.05.2010

Metadata

Citation

APA:

Skobir, Danijela, Vodopivec, Franc, Arzenšek, Boris (1998). Vpliv toplotne obdelave na mikrostrukturo in trdoto jekla X20CrMoV121. Kovine zlitine tehnologije, volume 32, issue 3/4, str. 177-180. URN:NBN:SI:DOC-HEVVC5VH from http://www.dlib.si

MLA:

Skobir, Danijela, Vodopivec, Franc, Arzenšek, Boris. "Vpliv toplotne obdelave na mikrostrukturo in trdoto jekla X20CrMoV121." Kovine zlitine tehnologije volume 32. issue 3/4 (1998) str. 177-180.
<http://www.dlib.si/?URN=URN:NBN:SI:DOC-HEVVC5VH>

Kovine zlitine tehnologije
1992-1999
(Assembly record)

Vpliv toplotne obdelave na mikrostrukturo in trdoto jekla X20CrMoV121The influence of heat treatment on microstructure and hardness of X20CrMoV121 steel

Vpliv toplotne obdelave na mikrostrukturo in trdoto jekla X20CrMoV121
The influence of heat treatment on microstructure and hardness of X20CrMoV121 steel