608 KB32 KB199820242019Osolnik, UršaOven, PrimožPavlič, MatjažPetrič, MarkoPoljanšek, IdaVek, ViljemŽepič, Vesnaštevilka:1letnik:68str. 37-45ISSN:0024-1067COBISSID_HOST:3084681URN:URN:NBN:SI:doc-KCEQTEIHslZveza društev inženirjev in tehnikov gozdarstva in lesarstva SlovenijeLes (Ljubljana)bionanocompositebionanokompozitnanofibrilirana celulozananofibrillated celluloseodpornost proti razenjuPLAprosojnostresistance to scratchingtransparencyResistance of polylactic acid/nanofibrillated cellulose composite to scratching| Odpornost kompozita na osnovi polimlečne kisline in nanofibrilirane celuloze proti razenju|The aim of the study was to prepare a bionanocomposite based on polylactic acid (PLA) with the addition of nanofibrillated cellulose (NFC) as a reinforcement component. For the production of the composite we used unmodified and acetylated NFC (A_NFC). Freeze-dried NFC was acetylated in a heterogeneous system with acetic anhydride in di- methylformamide (DMF) in the presence of pyridine as a catalyst. The success of the acetylation was determined by FT-IR spectroscopy. PLA films were prepared with the addition of 2.5 %, 5 % and 10 % of unmodified and acetylated NFC. The focus of this research was the impact of the NFC additive on the transparency and on the resistance of the biona- nocomposite to scratching. The transparency of the bionanocomposite film was measured using UV-Vis spectrophoto- metry, and the resistance of the films to scratching was evaluated with a scratch test. The optimal amount of NFC and A_NFC added to the polymer PLA to achieve better resistance of the bionanocomposite to scratching was determined. The best resistance of the prepared bionanocomposite to scratching was achieved by the addition of a 2.5 % A_NFC to the PLA polymer, which also has minimal reduced transparency with respect to the PLA film. With the highest addition of A_NFC to the PLA polymer, bionanocomposite films with minimal reduction of transparency were obtainedCilj študije je bil priprava bionanokompozita na osnovi polimlečne kisline (PLA) z dodatkom nanofibrilirane celuloze (NFC) kot ojačitvene komponente. Za izdelavo kompozita smo uporabili nemodificirano in acetilirano NFC (A_NFC). NFC, posušeno z zamrzovanjem, smo acetilirali v heterogenem sistemu z acetanhidridom v dimetilformamidu (DMF) ob prisotnosti piridina kot katalizatorja. Uspešnost acetiliranja smo ugotavljali z infrardečo (FT-IR) spektroskopijo. Pripravili smo PLA filme z 2,5 %, 5 % in 10 % dodatkom nemodificirane oziroma acetilirane NFC. Osredotočili smo se na proučevanje vpliva dodatka NFC na prosojnost bionanokompozita in na njegovo odpornost proti razenju. Prosojnost bionanokompozitnega filma smo merili z UV-Vis spektrofotometrijo, odpornost površine filmov proti razenju pa smo ovrednotili z vzmetnim svinčnikom. Določili smo optimalno količino dodane NFC in A_NFC polimeru PLA za doseganje boljše odpornosti proti razenju. Ugotovili smo, da z dodatkom 2,5 % A_NFC dosežemo najboljšo odpornost pripravljenega bionanokompozita proti razenju, ki ima tudi minimalno zmanjšano prosojnost glede na PLA film. Celo z najvišjim dodatkom A_NFC k PLA polimeru smo dobili bionanokompozitne folije z minimalnim zmanjšanjem prosojnostiTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaZveza lesarjev Slovenije