1911 KB37 KB199920252014Carmignani, CostantinoDi Puccio, FrancescaForte, PaolaVolandri, Gaiaštevilka:5letnik:60str. 363-372, SI 67ISSN:0039-2480COBISSID:13449243URN:URN:NBN:SI:doc-IMO4NXAHenZveza strojnih inženirjev in tehnikov Slovenije et al.Strojniški vestnikfinite element methodmetoda končnih elementovprenos zvokasimulacijesluhovodiFinite element formulations applied to outer ear modeling|The work described in this paper is part of a broader research activity on the development of a virtual ear. The present study focuses on the tympanic membrane and auditory canal modeling, which are important components in sound transmission. The standard finite element method (FEM) and an alternative method (the generalized FEM), suitable for modeling sound propagation at high frequencies, were applied. Two domains (fluid and structural) for the auditory canal and the tympanic membrane, respectively, were considered in order to evaluate the coupling of the different methods and to apply a fluid-structure interaction formulation. ANSYS software was used for solving FEM analyses, while GFEM simulations were obtained by implementing the method in Wolfram Mathematica. Simulation results include modal response, pressure distribution in the auditory canal and displacement distribution in the tympanic membrane. The identified modal frequencies of the auditory canal agree with published data reported in the literature. The validation of such method with standard FEM simulation at increasing mesh density shows that FEM is more suitable for simulations of the human ear in the audible frequency range, although the generalized formulation could be convenient if an ear model including the whole head or the ultrasound frequency range were investigatedDelo, predstaljeno v članku, je del obširnejših raziskovalnih aktivnosti na razvoju virtualnega ušesa. Obravnavana raziskava se osredotoča na modeliranje bobniča in sluhovoda, ki predstavljata pomembni komponenti pri prenosu zvoka. Za modeliranje širjenja zvoka pri visokih frekvencah sta v članku uporabljeni standardna metoda končnih elementov (MKE) ter alternativna metoda (posplošena MKE). Uporabljeni metodi sta ovrednoteni na podlagi sklapljanja dveh domen - strukturna domena za bobnič, fluidna domena za sluhovod - ter v nadaljevanju uporabljeni za formulacijo interakcije struktura-fluid. Za reševanje MKE analiz je v članku uporabljen program ANSYS, simulacije na podlagi modela posplošene MKE pa so pridobljene z implementacijo lastne kode v program Wolfram MathematicaTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaUniverza v Ljubljani, Fakulteta za strojništvo