4549 KB31 KB199920252020Li, ZixianQin, BoQin, Yanštevilka:6letnik:66str. 385-394ISSN:0039-2480COBISSID_HOST:22625283URN:URN:NBN:SI:doc-I0D1GRZDenZveza strojnih inženirjev in tehnikov Slovenije etc.Strojniški vestnikdiagnosticiranje napak pri planetnih gonilihextreme learning machinefault diagnosis for planetary gearboxinformacije o sploščenostikurtosis informationmetoda ekstremnega učenjaprehodne značilketransient featuresvariacijska dekompozicija oblikvariational mode decompositionA transient feature learning-based intelligent fault diagnosis method for planetary gearboxes|Sensitive and accurate fault features from the vibration signals of planetary gearboxes are essential for fault diagnosis, in which extreme learning machine (ELM) techniques have been widely adopted. To increase the sensitivity of extracted features fed in ELM, a novel feature extraction method is put forward, which takes advantage of the transient dynamics and the reconstructed high-dimensional data from the original vibration signal. First, based on fast kurtosis analysis, the range of transient dynamics of a vibration signal is located. Next, with the extracted kurtosis information, with variational mode decomposition, a series of intrinsic mode functions are decomposed; the ones that fall into the obtained ranges are selected as transient features, corresponding to maximum kurtosis value. Fed by the transient features, a hierarchical ELM model is well-trained for fault classification. Furthermore, a denoising auto-encoder is used to optimize input weight and threshold of implicit learning node of ELM, satisfying orthogonal condition to realize the layering of its hidden layers. Finally, a numerical case and an experiment are conducted to verify the performance of the proposed method. In comparison with its counterparts, the proposed method has a better classification accuracy in the aiding of transient featuresTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaUniverza v Ljubljani, Fakulteta za strojništvo