32 KB196 KB31 KB199920252000Čuš, FrancVrečer, Gorazdštevilka:1letnik:469 stranistr. 5-13ISSN:0039-2480COBISSID:3592987URN:URN:NBN:SI:doc-6R1NX64CenslAssociation of Mechanical Engineers and Technicians of Slovenia et al.Zveza strojnih inženirjev in tehnikov Slovenije et al.Strojniški vestniklogika mehkamehka logikamodelinačrtovanjeorodjapretokpretok orodijModel strateškega odločanja distribucije orodij z uporabo pravil mehke logike| Model od strategic determination of tool distribution based on the fuzzy rules|This paper concerns the working out of a fuzzy algorithm model to simulate the dynamic system of tool distribution. A model of tool motion in the production process and in the store of a medium-size company is made. In a company, the production flexibility depends to a large extent on the high-quality manufacturing and the flow and the strategic distribution of tools, which must always be available in time and in sufficient quantities. Tool flow is dynamical and can be monitored according to fuzzy algorithm principles by means of feedback signals with which the desired and obtained values are compared and the flow controlled. This paper shows the model with which we presented the time delays occuring during the tool distribution. The presented real tool distribution monitoring system of a company comprises the flow of materials, informations and production means. The system features the interconnections between the individual units of the company, involved in the information flows with which the flexibility of the system was increasedCilj, ki ga želimo izpostaviti v prispevku, je izdelava modela mehke logike, s katerim simuliramo dinamični sistem distribucije orodij. Narejen je model gibanja orodij v proizvodnem procesu in skladišču srednje velikega podjetja. V podjetju je prilagodljivost proizvodnje v veliki meri odvisna od obsega zelo kakovostnih izdelkov, dobrega nadzora pretoka in strateške distribucije orodij, ki morajo biti na voljo vedno ob pravem času in v zadostnih količinah. Imamo dinamični pretok orodij, ki ga je mogoče nadzorovati z uporabo zakonov mehke logike in povratnih signalov. Z njimi primerjamo željene in dobljene vrednosti in krmilimo pretok. V prispevku je prikazan model, s katerim smo prikazali časovne odmike, ki nastanejo pri distribuciji orodij. Predstavljeni realni nadzorni sistem pretoka orodij v podjetju je sestavljen iz pretoka materiala, informacij in proizvodnih sredstev. V sistemu obstajajo zveze med posameznimi enotami podjetja, ki so povezana z informacijskimi tokovi, s katerimi smo povečali prilagodljivost sistemaTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaUniverza v Ljubljani, Fakulteta za strojništvo