38 KB305 KB31 KB199820252012Belšak, NatašaBrglez, PoloncaHolobar, AndrejKolar, MitjaPivec, Aleksandraštevilka:1letnik:59str. 50-58ISSN:1318-0207COBISSID:15889686URN:URN:NBN:SI:doc-2XSLR9ZLenSlovenian Chemical SocietySlovensko kemijsko društvoActa chimica slovenicakisikoptični senzorjiDetermination of oxygen by means of a biogas and gas - interference study using an optical tris (4,7-diphenyl-1,10-phenanthroline) ruthenium(II) dichloride complex sensor|Biogas is a mixture of gases produced by anaerobic fermentation where biomass or animal waste is decomposed and methane and carbon dioxide are mainly released. Biogas also has a very high moisture content (up to 80%), temperatures of around 60 °C, high pressure, and can contain other gases (N2, H2S, NH3 and H2). We searched for an appropriate measuring system for the determining of oxygen in biogas, since the production process of biogas must be run under anaerobic conditions; as the presence of oxygen decreases the quality of the biogas. Ruthenium (II) complexes are by far the most widely-used oxygen dyes within optical oxygen sensors. In general, they have efficient luminescences, relatively long-life metal-ligand charge-transfer excited states, fast response times, strong visible absorptions, large Stokes shifts, and high-photochemical stability. The purpose of this work was to characterise and optimize an optical oxygen sensor using tris (4,7-diphenyl-1,10-phenanthroline) ruthenium(II) dichloride complex for measuring oxygen. Different sensor properties were additionally studied, focusing on the interference of external light, temperature, and various gases. A special gas-mixing chamber was developed for gas interference study, and online experiments are presented for oxygen determination within the pilot biogas reactorTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaSlovensko kemijsko društvo