56 KB1026 KB37 KB199920252008Belšak, AlešFlašker, Jožeštevilka:114 straniletnik:54str. 11-24ISSN:0039-2480COBISSID:10416923URN:URN:NBN:SI:doc-QSILW60DenAssociation of Mechanical Engineers and Technicians of Slovenia et al.Zveza strojnih inženirjev in tehnikov Slovenije et al.Strojniški vestnikanalizenapakevibracijezanesljivostzobniška gonilaVibration analysis to determine the condition of gear units| Vrednotenje stanja zobniških gonil s pomočjo vibracij|The use of the most up-to-date production technologies and a high level of production stability without any unscheduled outages are of utmost importance; they are affected primarily by monitoring the condition and by adequate maintenance of mechanical systems. Life cycle design of machines and devices is nowadays gaining ground rather quicklyč users want that machines and devices operate with a high level of accuracy and reliability and with as few outages as possible. Thus, by monitoring the condition, not only the presence of changes but also predictions related to the type and size of damage or error jeopardising the high quality of operation during the remaining life cycle of a machine is establishedIzkoristek najsodobnejših proizvodnih tehnologij in visoka stopnja stabilnosti proizvodnje brez nepredvidenih zaustavitev sta najpomembnejše faktorja, na katera imata pomemben vpliv predvsem nadzor stanja in ustrezno vzdrževanje mehanskih sistemov. Ker se danes vedno bolj uporablja projektiranje strojev in naprav na dobo trajanja, je zelja uporabnika, da je delovanje v predvideni dobi trajanja kakovostno in čim zanesljivejše ter da je zaustavitev čim manj. Tako s pomočjo spremljanja stanja ne ugotavljamo samo prisotnosti sprememb, ampak želimo napovedati vrsto in velikost poškodbe oz. napake, ki ogroža kvaliteto obratovanja v preostali življenjski dobiTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaUniverza v Ljubljani, Fakulteta za strojništvo