2209 KB0 KB199920252023Bischof, ThomasBoltežar, MihaRazpotnik, Matejletnik:69številka:7/8str. 289-298ISSN:0039-2480DOI:10.5545/sv-jme.2023.592COBISSID_HOST:159139331URN:URN:NBN:SI:doc-PAIR808PenZveza strojnih inženirjev in tehnikov Slovenije etc.Strojniški vestnikbearing stiffness matrixdinamski model ležajadynamic bearing modelkroglični ležajprenos vibracijstožčasti ležajštudija od spodaj-navzgortapered-roller bearingtogostna matrika ležajevvibration transmissionThe dynamics of tapered-roller bearings – a bottom-up validation study|Rolling-element bearings are one of the most important elements when predicting the noise of rotating machinery. As a major connecting point between the rotating and non-rotating parts, their dynamic properties have to be accurately known. In this investigation we present a bottom-up approach to characterising the dynamics of the rolling-element bearing. A special test device was designed and built to assess the quality of the well-established analytical modelling approach of Lim and Singh. Two types of bearings were tested, i.e., the ball and tapered-roller types. The dynamic properties were observed by investigating the frequency-response functions. In addition, non-rotating as well as rotating test scenarios were checked. It was shown that the ball bearing model adequately predicts the system’s response, whereas the tapered-roller bearing model requires modifications. These results were further confirmed with a quasi-static load-displacement numerical evaluation, where a full finite-element model serves as the referenceTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaUniverza v Ljubljani, Fakulteta za strojništvo