477 KB36 KB199920252019Boltežar, MihaOgrinec, PrimožSlavič, Jankoštevilka:11/12letnik:65str. 631-640ISSN:0039-2480COBISSID_HOST:16942107URN:URN:NBN:SI:doc-J61QSVV8enZveza strojnih inženirjev in tehnikov Slovenije etc.Strojniški vestnikfatigue lifenaključne obremenitvene-stacionarne obremenitvenon-Gaussian loadingnon-stationary loadingrandom loadsspectral methodsspektralne metodestacionarne obremenitvestationary loadingutrujanje materialavibracijsko utrujanjevibration fatiguevibration testingHarmonic equivalence of the impulse loads in vibration fatigue|In vibration fatigue, three unique types of loads are typical: random, harmonic and impulse. In an application any of these loads are possible. A fatigue-life analysis is possible in the time and frequency domains using the frequency-response function of a structure. Recent studies demonstrated that the impulse loads influence the accuracy of a fatigue-life prediction in the frequency domain. The focus of this research is a theoretical study of an equivalent harmonic load to the impulse load on a single-degree-of-freedom system in order to investigate the feasibility of impulse loads in vibration testing. This research shows that there is a relationship between the impulse and harmonic loads that is related to the underlying dynamic properties (e.g., damping, natural frequency). Based on a theoretical analysis an experimental procedure was developed for both cases of excitation, which was able to confirm the theoretical analysis. Using the modal decomposition the single-degree-of-freedom approach can be generalized to multiple-degrees-of-freedom systemsTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaUniverza v Ljubljani, Fakulteta za strojništvo