4231 KB0 KB201420262022Gečevska, ValentinaTomov, MiteVasileska, E.številka:1letnik:17str. 75-88DOI:10.14743/apem2022.1.422ISSN:1854-6250COBISSID_HOST:269101571URN:URN:NBN:SI:doc-FV4YGETGenFakulteta za strojništvo, Inštitut za proizvodno strojništvoAdvances in production engineering and managementdesign of experimentsDOEhard turningkinematical-geometrical copyingmatematično modeliranjemathematical modellingmodeliranjeprediction modellingroughness parameterssurface roughnessModelling of multiple surface roughness parameters during hard turning: a comparative study between the kinematical-geometrical copying approach and the design of experiments method (DOE)|This paper proposes and applies two different methodologies for modelling the roughness parameters in hard turning. The first method is based on the kinematical-geometrical copying of the cutting tool geometry onto the machined surface including a feedback loop through the parameter of statistic equality of sampling lengths in surface roughness measurements (SE). The other method employs the Design of Experiments (DOE) principles expressing the roughness parameters as first order nonlinear function of the input variables: cutting speed v, feed f, depth of cut ap, and tool nose radius r?. The research includes the Ra and Rz roughness parameters which are commonly modelled throughout the research works, and additionally develops models for the Rp, Rv and Rmr(c) roughness parameters which are more challenging to model compared to Ra and Rz as they depend more on the shape of the roughness profile and position of its mean line. Both methodologies for all roughness parameters were verified using a CNC lathe and special rings made of steel EN C55 with hardness of 53±1 HRC. Considering that the roughness profile is just a part of the total geometric deviations of the processed surfaces, and it is obtained from the total profile using software filtration, the research also considers the Wa parameter (waviness profile), as well as the deviations from the circularity (out-off-roundness) of the processed rings as indicators for the stability of the machining processTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaUniverza v Mariboru, Fakulteta za strojništvo