26 KB283 KB24 KB200020242000Koroušić, BlaženkoRozman, AlojzTehovnik, Francletnik:34številka:67 stranistr. 401-407ISSN:1580-2949COBISSID:210527URN:URN:NBN:SI:doc-EGM1LHJVslInštitut za kovinske materiale in tehnologijeMateriali in tehnologijejeklokontrola kvalitetevodikžlindražveploSodobne tehnologije pri proizvodnji kvalitetnih jekel v METAL-Ravne| Advanced technologies for the production of high-quality steels at METAL-Ravne|The control strategy in steel making is based on samples taken from the molten metal and slag as well as from solid products. Dynamic control models based on rapid detection and measurement during the processing of the molten steels have developed significantly over the last few years. There are a lot of new diagnostic methods which enable plant engineers to control the quality of molten metal during processing. Several examples of monitoring methods are described in the paperStrategija kontrole jeklarskih procesov skloni na jemanju vzorcev tekoče kovine in žlindre ter vzorcev iz gotovih pol-izdelkov. Hitri razvoj v zadnjih letih ti. 'modelov dinamične kontrole', ki slonijo na hitri detekciji in meritvah, ki se izvajajo med procesiranjem jekla, je omogočil nove možnosti kontrole. Nekaj primerov metod za nadzor procesov bo predstavljeno v naslednjem prispevkuTEXTznanstveno časopisjejournalsSlovenian National E-content AggregatorNational and University Library of SloveniaInštitut za kovinske materiale in tehnologije